Water Treatment

SHAKESBY SVET/D Range - Iron Removal System

Shakesby SVET/D Range - Iron Removal System

SVET & SVED Ranges

The SVET & SVED Ranges suits all sizes of domestic properties and small industrial sites, treating all the water from a borehole pump. They are designed to operate with pressurised untreated supplies where untreated water is used in addition to the filtered supply. The filters continually aerate the water in service and use air and water to backwash. This means they can cope with higher iron and hydrogen sulphide (rotten egg smell) levels, higher flow rates and use about half the service flow rate to backwash. Fully integrated filters contain all the aerating and venting components in one unit. SVET & SVED Filters operate their own inlet solenoids.

System: Treats water from pressurised supply, maintaining an untreated supply.
Iron level: Up to 30000ug/l (30mg/l) depending on site conditions.
Filter Media: SIRM
Backwash Frequency: 2-7 days (dependant on the nature of the water)

Model SVET/D1354 SVET/D1665 SVET/D1865
Max. Rec. Flow rate 1.3 2.0 2.5
Backwash flow rate 0.6 0.8 1.1
Dimensions (H x W) 64”x18” 75”x18” 78”x18”

All Flow rates in m3/hr @ 3 bar appx.

Data Sheet Downloads

Buy Now

Click the link to our EBAY store to purchase items!

Alternatively,

For information on any of the products mentioned on this site

Please contact our sales office on
01326 565454 or Email us

SHAKESBY SVET/D Range - Iron Removal SystemSHAKESBY SVET/D Range - Iron Removal SystemSHAKESBY SVET/D Range - Iron Removal System